Panasonic CF-T8 Series Supplementary Instructions Manual page 17

Accessing "File Safe"
after Protector Suite
uninstallation.
Accessing "File Safe"
after computer crash.
Removing data from
the reader.
"Lift Finger" is
displayed during
operation.
"File Safe" data can be accessed only using Protector
Suite. If you accidentally uninstalled Protector Suite,
you have to reinstall it. If passport data was not
removed during uninstallation, everything will work
automatically including "File Safe". If the passport
data was removed during uninstallation, the "File
Safe" will recognize that the installation was changed
and will offer to use the backup password, instead.
If you have an exported passport, import it now so
you can access "File Safe" directly using fi ngerprints.
Otherwise you can access "File Safe" using the "File
Safe" backup password: "File Safe" will recognize
that the installation was changed and will offer to use
the backup password, instead.
When enrollment to the device is used, passport
data is stored to the device. To remove it, go to
the [Delete user data] passport wizard and delete
existing passports.
You can temporarily disable the fi ngerprint sensor
with the following procedure.
A <Model with Windows 7>
Click on the notifi cation area and right-click
the "Fingerprint software" icon
<Model with Windows XP>
Right-click the "Fingerprint software" icon
the notifi cation area.
B Select [Don't Use Sensor].
The icon turns gray.
To enable the fi ngerprint sensor, proceed as follows.
A <Model with Windows 7>
Click on the notifi cation area and right-click
the "Fingerprint software" icon
<Model with Windows XP>
Right-click the "Fingerprint software" icon
the notifi cation area.
B Select [Use Sensor].
.
in
.
in
17