Installation - Panasonic CF-T8 Series Supplementary Instructions Manual

Installation

Step 1 TPM Installation
Refer to on-screen manuals
(TPM)". (<Model with Windows 7> Click
README.pdf", and press Enter . / <Model with Windows XP> Click [start] - [Run],
input "C:\util\drivers\tpm\README.pdf", and click [OK].)
If the TPM is not being used, skip this step.
Step 2 Fingerprint Utility Installation
Performed by the Computer Administrator.
1
Log on to Windows as an Administrator.
2
Close all other programs.
3
<Model with Windows 7>
Click (Start) and input "C:\util\drivers\fngprint\install
\32-bit\setup.exe", and press
<Model with Windows XP>
Click [start] - [Run], input "C:\util\drivers\fngprint\install
\32-bit\setup.exe", and click [OK].
The "Protector Suite ∗ . ∗ Setup" screen appears.
4
Click [Next].
Installation starts. Follow the on-screen instructions.
5
When the "Protector Suite ∗ . ∗ has been successfully
installed." message appears, click [Finish].
At the confi rmation message, click [Yes].
The computer restarts.
6
Log on to Windows as an Administrator.
The "Fingerprint software" icon
NOTE
"Getting Started with the Fingerprint Reader" may appear if you touch the
sensor before enrolling fi ngerprints.
Installation Manual of "Trusted Platform Module
(Start) and input "C:\util\drivers\tpm\
.
Enter
appears.
5