Assembly Instructions - Nexgrill 720-0778E Instruction Manual

4. Back Panel Assembly
Remove the back panel from the carton. Position the
back panel (I) with the flat side facing outward. Attach
the back panel to the bottom panel (B) with three 1/4-
in. x 15 mm truss head screws with locking washers
(CC) as shown in Fig. 4.
Use six 1/4-in. x 15 mm truss head screws with
locking washers (CC) to connect the back panel (I)
to the right and left side panels as shown in Fig. 5.
5. Firebox Assembly
Remove the firebox assembly (A) from the carton
and carefully place onto the grill cart.
CAUTION The firebox assembly is heavy and
will require two or more people to lift and
position onto grill cart. Failure to do so may
result in injury.
Note: Take care when moving the firebox
assembly as the bottom flanges can be bent,
which would misalign the holes.

Assembly Instructions

B
A
13
Fig. 4
3X
CC
I
6X
Fig. 5
CC
I
Fig. 6
Grill Cart