Battery Removal - Polaris 2008 Defense MVRS 800 6X6 Owner's Manual

Battery
Improperly connecting or disconnecting battery cables can result in an
explosion and cause serious injury or death. When removing the battery,
always disconnect the negative (black) cable first. When reinstalling the
battery, always connect the negative (black) cable last.

Battery Removal

1. Remove the front dash
panel. See page 23.
2. On conventional batteries,
remove the battery vent
tube.
3. Disconnect the black
(negative) battery cable
first.
4. Disconnect the red
(positive) battery cable last.
5. Remove the battery retainer
bracket bolt and remove the
bracket.
6. Lift the battery out of the
vehicle. Be careful not to tip
a conventional battery sideways, which could spill electrolyte.
If electrolyte spills, immediately wash it off with a solution of one tablespoon
baking soda and one cup water to prevent damage to the vehicle.
WARNING
CAUTION
MAINTENANCE
Battery
Retainer
Bracket Bolt
97