Step 7. Connecting The Cables; Connecting Jtag And Vs/Comm Cables - IBM RS/6000 Enterprise Server M80 Installation Manual

Step 7. Connecting the Cables

Follow the procedures in this section to connect the cables. For instructions on routing
and securing cables, see "Routing and Securing Cables" on page 21.

Connecting JTAG and VS/COMM Cables

Refer to the following figure to connect the JTAG and VS/COMM cables.
CEC Drawer Attached to One I/O Drawer
12
Installation Guide
CEC Drawer
V/S COMM
JTAG
Primary I/O Drawer
JTAG
V/S COMM