Additional Keyboard Attributes - IBM RS/6000 Enterprise Server M80 Installation Manual

Communication
Setup Attributes
Turnaround character
Interface
Line control
Break signal (ms)
Send null suppress
Send null
Response delay (ms)

Additional Keyboard Attributes

The following keyboard attributes are for the keyboard attached to the 3151, 3161, and
3164 terminals.
Keyboard Setup
Attributes
Enter
Return
New line
Send
Insert character
3151/11 3151
/31/41) /51/61,
Settings Settings
CR CR
EIA-232 EIA-232
IPRTS IPRTS
500 500
On On
100 100
3151/11 3151
/31/41 /51/61
Settings Settings
Return Return
New line New line
CR CR
Page Page
Space Space
Appendix F. General Attributes Required When Using a TTY Terminal
3161 /3164 Description
Settings
CR Selects the carriage return (CR)
character as the line turnaround
character.
EIA-232 Uses the EIA-232 interface
protocol.
IPRTS Uses the 'permanent request to
send' (IPRTS) signal to
communicate with system unit.
500 The terminal sends a break signal
to the system unit within 500 ms
after the Break key is pressed.
Trailing null characters are not
sent to the system unit.
On Trailing null characters are sent to
the system unit.
100 The terminal waits for 100 ms for
the system unit to respond.
3161 /3164 Description
Settings
Return The Enter key functions as the
Return key.
New line The cursor moves to the next line
when the Return key is pressed.
CR The Return key generates the
carriage return (CR) and the line
feed (LF) characters. The line
turnaround occurs after the CR
and LF characters are generated.
Page The contents of the current page
are sent to the system unit when
the Send key is pressed.
Space A blank character is inserted
when the Insert key is pressed.
73