Getting Started - Ness Pro 16/2 User Manual

PRO SERIES DVR User's Guide
Chapter 2
G S
ETTING TARTED
This chapter explains what you need to do after turning on your Digital Video Recorder.
Experienced Digital Video Recorder users may skip this chapter if necessary while using
the rest of the manual merely as a reference.
Powering Up the Digital Video Recorder for the First Time
To connect the Digital Video Recorder to the Power outlet, please refer to Figure 2-
1 and the following instructions:
1. Attach the cameras to the BNC outputs at the back of the DVR.
2.
Connect a TFT LCD Monitor or CRT Monitor to the VGA Input
3.
Connect a RJ-45 LAN cable to the Ethernet LAN Card
4.
Connect a printer to the Printer Port
5. Connect a keyboard & Mouse to their respective PS/2 Ports
6.
Power cords differ from region to region. Use the correct power cord based on your
region.
7.
Check the Voltage Switch so that it matches your region's requirements.
8. Connect one end of the power cord to the electrical outlet and the other to the Digital
Video Recorder.
Figure 2-1: Connecting the Power Cord
9. Power up the DVR by pressing the Power switch at the rear of the DVR
12