4
INTRODUCTION
FASTENER USAGE
DESCRIPTION - FASTENER USAGE
WARNING: USE OF AN INCORRECT FASTENER
MAY RESULT IN COMPONENT DAMAGE OR PER-
SONAL INJURY.
Fasteners and torque specifications references in
this Service Manual are identified in metric and SAE
format.
During any maintenance or repair procedures, it is
important to salvage all fasteners (nuts, bolts, etc.)
for reassembly. If the fastener is not salvageable, a
fastener of equivalent specification must be used.
1
High Beam
2
Fog Lamps
3
Headlamp, Parking Lamps, Panel Lamps
4
Turn Warning
5
Hazard Warning
6
Windshield Washer
7
Windshield Wiper
8
Windshield Wiper and Washer
9
Windscreen Demisting and Defrosting
10
Ventilating Fan
11
Rear Window Defogger
12
Rear Window Wiper
THREADED HOLE REPAIR
DESCRIPTION - THREADED HOLE REPAIR
Most stripped threaded holes can be repaired using
a Helicoil . Follow the vehicle or Helicoil recommen-
dations for application and repair procedures.
INTERNATIONAL SYMBOLS
DESCRIPTION - INTERNATIONAL SYMBOLS
The graphic symbols illustrated in the following
International Control and Display Symbols Chart are
used to identify various instrument controls. The
symbols correspond to the controls and displays that
are located on the instrument panel.
INTERNATIONAL SYMBOLS
13
14
15
16
17
18
19
20
21
22
23
24
Rear Window Washer
Fuel
Engine Coolant Temperature
Battery Charging Condition
Engine Oil
Seat Belt
Brake Failure
Parking Brake
Front Hood
Rear hood (Decklid)
Horn
Lighter
WJ