Refrigerator Work Features - LG GA-B499 Series Owner's Manual

CARE AND MAINTENANCE
• Remove the limiter fig. 8 (25) in the lower part
of the refrigerating compartment door by
undoing the screws fig. 8 (26) and secure it on
the opposite side. Do the same operation
for the freezing compartment door.
• Remove the sleeve fig. 8 (27) in the lower part
of the refrigerating compartment door and fix it
on the opposite side.
(31)
(32)
(30)
• Remove the door upper hinge fig. 9 (31) by
undoing the screws fig. 9 (30) and the bolts
fig. 9 (32) and secure it on the opposite side
of the hinge fig. 9 (31).
• Remove the blind plug fig. 9 (35) in the upper
part of the refrigerating compartment door and
fix it on the opposite side.
(27)
(25)
(26)
Fig. 8
(35)
Fig. 9
(33)
(34)
Fig. 10
• Remove the door closer fig. 10 (33) in the
lower part of the refrigerating compartment
door by undoing the screws fig. 10 (34) and
secure it on the opposite side.
• Assemble the door lower hinge fig. 9 (31)
of the refrigerating compartment, assemble the
door central hinge fig. 7 (23) of the
refrigerating compartment, assemble the door
upper hinge fig. 6 (19) and plug in the
connecting cable fig. 2 (9), mount the cover
fig. 4 (13), fig. 3 (11) and fig. 2 (7) in the
reverse order.
CAUTION!
However, when you want to reverse the
doors, you must call to service agent.
Reversing the doors is not covered by the
warranty.

Refrigerator work features

As a result of thermal strain for components of
a refrigerator appliance can be heard crackling
noise that is not a defect and doesn't affect
efficiency of the appliance. This special sound
when the thermo-regulator and compressor and
turned on is a normal state, which appears
during the working process of appliance's
electric installation.
The gas refrigerant produces a slight noise even
when the compressor is not running (this is not
a defect.)
While refrigerator appliance working process
can be heard:
- flick of the temperature relay;
- murmur of refrigerant flowing round cycle;
- cracking noise because of the materials
deformation by temperature.
All that is not defect and doesn't affect efficiency
of the appliance.
54