Toshiba e-STUDIO202S Service Manual page 17

Power save indicator
On: Indicates the unit is in a power save mode.
Blinking: Indicates that the unit is initializing (when the side
cover is opened and closed or the power turned off
and on).
SCAN indicator
On: The SCAN ( ) key has been pressed and the unit
is in scanner mode.
Blinking: A scan job is being executed from the computer, or
scan data is stored in the unit's memory.
Off: The unit is in the copy mode.
*3: Using the SCAN key to begin scanning
Note:
• Scanning is not possible during a copy job.
• If the SCAN ( ) key is pressed during a print job, the scan
job will be stored.
• When scanning an original that has been placed in the ADF,
only one original can be placed unless you are using Desk-
top Document Manager.
1) Press the SCAN ( ) key.
The unit enters scan mode.
2) Place the original you wish to scan on the document glass/
ADF.
3) Press the right copy quantity key to display the number of
the application that you wish to use for scanning.
The application numbers are initially as follows.
Application
number
SC1 Desktop Document Manager
(Full color) (if installed)
SC2 Desktop Document Manager
(Monochrome) (if installed)
SC3 E-mail (your standard e-mail program in
the Windows OS you are using)
SC4 Fax (if a fax program is installed)
SC5 OCR (if an OCR program is installed)
SC6 Microsoft Word (if installed)
4) Press the start ( ) key.
Scanning will start and the scanned data will be transferred
to the application.
e-STUDIO202S EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 3
Application launched