External Standard Flue Kit (51) - Ecotec Amalfi Owners & Installation Manual

2.8

External Standard Flue Kit (51)

50
C
6 December 2006
32
Internal Standard Flue Kit
25mm
600mm from
clearance
roof
penetration
D
A
E
To order :
This flue kit may be used in new and replacement
applications with the flue penetrating the wall
This ue kit may be used in new and replacement
behind the fire, running vertically up an outside
applications in rooms with stud height of 2.4m. The
wall and penetrating the soffit.
overall height of the ue is 3.6m. The visible u e is
height of the flue is 3.6m. All visible flue has a
nished in black and the ceiling plate is white. T he
galvanised finish, and can be powdercoated on
support angles for securing the liner to the ceilin g are
request. Kit is supplied in a carton.
not shown. Kit is supplied in a carton.
Each 50 Internal Standard Flue Kit contains:-
a P t r N o D
1 Galvanised outer liner
ø100mm x 900mm long
2 Stainless steel inner liner
ø75mm x 900mm long
4a Black p/coat outer liner
ø100mm x 900mm long
5 Inner/outer ue liner spacer
6c Ceiling thimble ø107mm hole
7c Ceiling decor plate
ø107mm hole – white
8 Rain cap 75mm
9 Rain Cap 100mm
10b Elbow 45° – ø75mm stainless
– black (painted)
12b T-adaptor/cleanout – ø75mm
– black (painted)
23 Support angle 950mm long
– 50mm x 50mm sides
Note: The Davin 50 Internal Standard Flue
Kit complies with AS/NZS 2918:2001 as per
Applied Research Test Report 05/1185, dated
15 September 2005.
All res must be installed by a quali ed
installer as per the manufacturer's
instructions and AS/NZS2918:2001.
Telephone 64 3 347 9915. Fax 64 3 347 9916. info@
Pellet Fire Flue Kits
s e i r c t p o i n
natures ame.co.nz www.natures ame.co.nz .
The overall
Q u a n i t y t
1
4
3
2
1
1
1
1
1
1
2