Setting The Language (Language Menu); Settings Menu; Description Of Functions; 3.10.1 Change Of Operating Power - Ecotec Amalfi Owners & Installation Manual

3.8

Setting the Language (Language Menu)

To set the language, proceed as follows:
4. Remove and reset the electricity supply of the stove using the general switch on the back.
5. The display will show FINAL CLEANING and then OFF.
6. Keep button P4 pressed for 2 seconds, CLOCK SETTING MENU will appear.
7. Press button P4 twice; the display will show LANGUAGE MENU.
8. Access with button P6: the display will show the language selected.
9. With buttons P4 and P5, select the language desired.
10. Confirm with button P6 to return automatically to MENU' 03 SELECT LANGUAGE MENU.
3.9

Settings Menu

In this menu you can check the values of the parameters set in the control unit. This menu is used when
a Service Technician has to understand the parameters set in the machine, to find any modifications to
improve the functioning of the stove.
To enter this menu, proceed as follows:
1. Keep button P4 pressed for 2 seconds: CLOCK SETTING MENU will appear.
2. Press button P4 3 times; the display will show SEE SETTINGS MENU.
3. Access with button P6: the display will show the screen desired.
4. Scroll using the button P6 to display the parameters set.
5. Scroll till last parameter to return automatically to MENU' 04 SEE SETTINGS MENU'.
3.10

Description of Functions

3.10.1 Change of Operating Power

To change the operating power, press key P1 to enter the appropriate menu and with keys P1 and P2
adjust the required power from 1 to 5. Ecoteck recommends that you leave the stove power at power 5
so that the boiler water temperature setting is reached as soon as possible; in this way the thermostove
may operate in modulation, decreasing pellet consumption. The power setting cannot be changed
during the MODULATE WORK phase.
3.11

Modifications of the room temperature setting

3.11.1 Room temperature functioning procedure

The stove functioning procedures when the room thermostat is on can be divided into 3 types:
• using the supplied room sensor
• with external thermostat
PROCEDURE WITH SUPPLIED ROOM SENSOR
If the room sensor supplied is used, the room temperature will be shown on
the display.
To set the desired temperature (modification of the room temperature setting),
press button P4 to enter the appropriate menu and with buttons P4 and
P5 adjust the desired value. When temperature is reached on the display,
MODULATION WORK will appear on the screen and the stove will reduce the
consumption of pellets to a minimum, reducing heating power.
14
Figure 11.
External Thermostat