Powering On The Mobile Responder; Performing Video Conferencing Tasks - Polycom VSX 8000 Quick Setup Manual

Powering on the Mobile Responder

To connect the power cord:
1. Open the panel on the side of the Mobile Responder by
pressing down on the latch.
2. Make sure you have the appropriate power cord for your
country, and connect one end of the cord to the power
connector inside the side panel.
3. Connect the other end of the power cord to a wall outlet.
The system can accept AC voltages between 98 and 250 VAC.
To power on the Mobile Responder:
1. Press the power button located inside the side panel to
the ON position.
2. Wait one to two minutes for the system to completely
power on.
When the system is powered on, the VSX 8000 home screen
appears on the display.

Performing Video Conferencing Tasks

For complete information about how to use the VSX 8000 to
place calls and perform other video conferencing tasks, refer
to the VSX 8000 series documentation. For more information
about the Mobile Responder, refer to the User's Guide for the
Polycom Mobile Responder. These documents are available
on the CDs that you received with your Mobile Responder or
at www.polycom.com/videodocumentation.