Powering Your Layout With The Powermax Transformer - Lionel 73-0190-250 6/12 Owner's Manual

PowerMax Transformer operation

Powering your layout with the PowerMax Transformer

Y
our PowerMax Transformer provides a total output of 2.4 amps. Also, available voltage
depends on how much load is on the output. Generally, track voltage is 0-16 volts (AC).
You may momentarily approach or exceed the 2.4 amp limit of the PowerMax Transformer
when pulling illuminated cars, or fighting over grades with heavy loads. When you reach
2.4 amps, the green light on the Transformer will begin to flash. This indicates that the
Transformer is in "fold-back mode." In fold-back mode, the Transformer is automatically
reducing, or folding back, power. This gradual reduction in power provides interruption-free
power while bringing the amperage back down to a safe level. If this condition lasts for more
than 30 seconds, the Transformer will shut off the power to the track and the green light will
continue to flash. Move the throttle to the off position to reset the Transformer and return to
normal operation.
73-0069-250 Thomas_Friends.indd 15
15
6/22/12 9:09 AM