Uoc Horizontal Position; Uoc Calibration; Pw1306 Pc Input Adc Calibration; 15" Tft Tv Service Manual - Hitachi 15LD2200 Service Manual

Service Submenu1
Dclock Polarity Falling
UOC Hposition *
ADC_Calibration
UOC_Calibration
**
* This value indicates the horizontal positioning of the picture.
** In this row "Software version and date is mentioned"
*** These will be changed according to the DI.
• It is possible to move by using "UP", "DOWN", "LEFT" and "RIGHT" RC buttons in this menu
structure.

UOC Horizontal Position

4.2.1.
• Press "DOWN" RC button at "Service Submenu 1" to highlight "UOC Hposition"
• Set the proper value to fit the applied pattern to screen by using "LEFT" and "RIGHT" buttons.

UOC Calibration

4.2.2.
• Apply 11 Vertical bar Grey-scale pattern with black on the left and white on the right side of
the picture (as seen below) from CVBS input.
• Press RC "AV" button, and switch to CVBS input and observe the pattern applied.
• Enter to PW1306 service menu.
• Press RC "DOWN" button at "Service Submenu 1" and highlight "UOC Calibration".
• Press RC "RIGHT" button to start calibration.

PW1306 PC Input ADC Calibration

4.2.3.
• Connect your TV with your PC and press RC "PC" button and observe the image.
• Press "M" to display Menu and select "Options" by using right button of RC.
• Press "Down" button of the RC and activate "auto adjustment".
• Press right button of the RC to perform "auto adjustment" and press "M" to exit from Menu.
• Apply black on the left, white on the right (as seen below) XGA@60Hz (1024x768) pattern
from PC.
• Enter PW1306 service menu as described above.
• Press RC "DOWN" button at "Service Submenu 1" and highlight "ADC Calibration".
• Press RC "RIGHT" button to start calibration.

15" TFT TV Service Manual

Service Menu
Service Submenu2
Init NVM
Initial APS
Hotel Mode Activate
Burn-In Mode
Factory Settings
Country
off Language
Panel Type
off
Menu Background
off
Remote Control
PC Mode
38
***
***
SAMSUNG 15_XGA
Opaque
***
on