•
OS (output with fixed slew-rate control)
•
AI (analog input, 5-volt tolerant)
•
DI (digital input, 5-volt tolerant)
•
DIS (digital input, 5-volt tolerant, Schmitt trigger)
•
I (XTALIN)
•
(XTALOUT)
•
P (power)
•
NC (no connect)
•
BOD (bidirectional open drain)
•
OSR (output with slew rate)
Signal
Pin
Type
RAIN
37
GAIN
43
BAIN
50
SOGIN
44
15" TFT TV Service Manual
Figure 8: PW1306 Pin configuration.
Red/Green/Blue Analog Inputs. These pins receive the Red, Green and Blue, or
AI
YPbPr/YCbCr/YUV analog signals from the analog video source. For proper
operation of the clamp feature, these inputs must be AC-coupled.
AI
AI
Analog Sync-On-Green or Sync-On-Luma input. Allows recovery of the HSYNC
AI
signal when this pin is AC-coupling to the Green (Red or Blue) analog signal source.
If not used, this pin should be left unconnected.
Function
16