MCAC-HTSM-2007-11
2.2.2 KJR-10B/KJR-12B (with a temp. sensor built-in, indoor unit need to be customized)
Remark: The main difference between these two wire controllers is the follow me function. KJR-12B/dP(T)
has this function, while KJR-10B/dP(T) hasn't.
Connect sketch to indoor unit:
A
B
C
D
E
5-Core Shield Cable,the length
i s d e c i d ed b y i n s t a l l a t i o n
For wire controller, just connect to indoor units with five terminals of A, B, C, D, E.
FUNCTION SUMMARIZE
The wire controller has functions as follows:
1. Connect with indoor units with five terminals of A,B,C,D,E.
2. Set the mode through buttons.
3. LCD display.
4. Display the timer function of remain time
FUNCTION OF LCD ON THE WIRE CONTROLLER
Control System
A
B
+5
C
D
E
RUN
Indoor Unit
Control device
159