Handset Operation And Function - SENAO SN-358 SKYPE Instruction Manual

Handset Operation and Function

A. Turn On/Off Handset:
1. You can power on the handset on by pressing and holding
2. You can power off the handset off by pressing and holding
B. Making a Telephone Call:
You can make an outgoing call in one of two ways.
1. Press , wait for dial tone, and then enter phone number.
2. Enter phone number first then press
C. Answering incoming Calls:
On incoming calls, the ringer will ring or vibrate unless the ringer has been turned off.
1. If the handset is on charger cradle, lift the handset to pick up the incoming call.
2. If the handset is not on charger cradle, press any key to answer the incoming call
except .
3. If you do not take the incoming calls, the display will prompt you on how many calls
you have missed.
Note: While receiving incoming calls, you can mute the ring by pressing
D. Disconnecting calls:
You can end a call by pressing
E. Redial:
1. You can use the Up Arrow (
Select and press
2. Press , then press OPTION Left soft Key redialing the last call.
F. Call waiting / Receiving a second call:
While talking on the phone, the
Pressing the
Pressing the
on hold.
G. Intercom:
1. Paging the base from the handset:
Press the
establish intercom.
When the receiving party's voice is heard at the base, answer through the built
or by placing the handset onto the charger cradle.
) Key to scroll through the last 10 phone numbers dialed.
.
key operates as a FLASH function as well.
key will place the current call on hold, and pick up the incoming call.
key again will return you to the first call and place the second call
key on the handset and then press BASE (left soft key) to
.
18
for 3 seconds.
for 3 seconds.
key.