Precautions When Creating A Time Map Table; Errors Before Creation Of The Time Map Table; Errors During Creation Of The Time Map Table - Pioneer HD-V9000 Technical Manual

9. Precautions When Creating a Time Map Table

The following precautions should be observed when creating a time map table using the HD-V9000
support software, HD Pilot.
 Save and manage the created time map table with the video file.
 If the video file is re-edited, re-encoded or renamed after the time map table has been created,
be sure to create the time map table again.
 If an error occurs when the time map table is created, it may be due to a stream problem with
the video file or
 the video file format may not be supported by the HD-V9000. In this case, check the video file
settings or make a stream check.

9.1 Errors Before Creation of the Time Map Table

Before time map table creation is executed using the HD Pilot [Make Time Mat Table] menu, the user is
warned that the file is not the prescribed file and the time map table cannot be created.
In this case, the file name is displayed in red.
[Error Conditions]
An error (displayed in red) occurs in the event of failure to comply with the following
conditions.(Judgment of file name only)
・The file name contains no more than 120 characters
・The file name consists solely of ASCII characters (halfwidth alphabet or digit characters and symbols:
0x20-0x7f).
(Japanese characters, etc. are not allowed)
・The file name has an extension.
・The extension is .mpeg, .mpg, .m2t or .ts.
・The file name does not contain the following characters: $, ', `, @, ~ (tilde), [, ]

9.2 Errors During Creation of the Time Map Table

If any of the following errors occurs while creating the time map table with HD Pilot, an error message
is displayed in the message column. If a time map table could not be created for a file, "Failed to
create Time Map Table for all files" is displayed in the bottom row in the message column and on the
pop-up screen. And the Time Map Table is not created.
(Messages in the message column are recorded in the log and can be viewed later.)
Errors
No.
Video format-related
1-1 The container format is not MPEG-2 TS.
AVI, ASF, OGM, MOV, MP4, etc. It is not a
video file. (The container cannot be
identified.)
Cause
22
- -
HD-V9000 Technical Manual Ver. 1.00
Error Message
Failed to create Time Map Table. This container format
is not supported, or it is not a video file.