Ipconfig; Arp - Weidmuller WI-MOD-E-G User Manual

Weidmuller Wireless Ethernet Modem & Device Server WI-MOD-E-G/A User Manual

"Ipconfig"

"ipconfig" can be used to show your current TCP/IP information, including your address, DNS server addresses, adapter
type and so on.
In the above example ipconfig was entered in the command prompt. The reply back shows the PC's IP address, Subnet
mask and the gateway it is connected to.
Other ipconfig commands will return back more information. The hardware or MAC address of the computer may be
discovered using the command ipconfig /all.
Ipconfig /? lists all of the commands and their usages available for use.

"Arp"

Displays and modifies the IP-to-Physical address translation tables used by Address Resolution Protocol (ARP).
Once a remote computer has been pinged, this can be used to see the IP address & MAC address of the remote
computer. It will also show any other devices on the network that it may be connected to.
The command used in the screen shot above is "arp –a". It shows the PC's IP address like the previous ipconfig
command, in this case the IP address is still 192.168.0.17. It also shows the IP address and its associated MAC address
of any another device that has a connection to it.
"Arp –?" Lists the commands available for this function.
Rev. 2.16 www.weidmuller.com 91