Eoc5611P Multi-Function Instruction Guide; Access Point; Access Point With Wds Function - EnGenius EOC5611P User Manual

Wireless outdoor client bridge / access point

Hide thumbs Also See for EOC5611P:

Table of Contents

2 EOC5611P Multi‐Function Instruction Guide

2.1 Access Point

In the Access Point Mode with WDS Function, EOC5611P function likes a central connection for any

stations or clients that support IEEE 802.11a/b/g network. Stations and Client must configure the

same SSID and Security Password to associate within the range. EOC5611P supports 4 different SSIDs

to separate different clients at the same time.

2.2 Access Point with WDS Function

EOC5611P also supports WDS function in Access Point Mode without losing AP's capabilities.

Configure others Access Point's Wireless MAC Address in both Access Point devices to enlarge the

wireless area by enabling WDS Link Settings. WDS function can support up to 8 different AP's MAC

addresses.

Auction: Not every Access Point device has support WDS in Access Point Mode. It is recommended

using EOC5611P if you would like to use this service.

Table of Contents