Package Contents; System Requirement; Hardware Overview - EnGenius EOC5611P User Manual

1.3 Package Contents
Open the package carefully, and make sure that none of the items listed below are missing. Do not
discard the packing materials, in case of return; the unit must be shipped in its original package.
1* Wireless Outdoor Access Point / Client Bridge (EOC5611P)
1* 24V/1A Power Adapter
1* Ethernet Cable
1* QIG
1* CD (User Manual)
2* 5dBi 5GHz Dipole Antennas
Auction: Using other Power Adapter than the one included with EOC5611P may cause damage of the
device.
1.4 System Requirement
The following conditions are the minimum system requirement.
A computer with an Ethernet interface and operating under Windows XP, Vista, 7 or Linux.
Internet Browser that supports HTTP and JavaScript.
1.5 Hardware Overview
Hardware Specification
MCU/RF
Memory
Flash
Physical Interface
LED indicators
Atheros AR2313+AR5112
32MB SDRAM
8MB
1 x 10/100 Fast Ethernet RJ‐45
1 x Reset Button
1 x Antenna Switch ( Internal and External Switch )
2 x SMA Connector ( One is for 2.4GHz and another is for 5GHz )
Power/ Status
LAN (10/100Mbps)
WLAN (Wireless is up)
3 x Link Quality (Client Bridge mode)
• Green: Good Quality
• Yellow: Marginally Acceptable Quality
6