Vlan Configuration Guide - EnGenius EOC5611P User Manual

Wireless outdoor client bridge / access point

Hide thumbs Also See for EOC5611P:

Table of Contents

10 VLAN CONFIGURATION GUIDE

Following procedures are used to configure VLAN on EnGenius product. EnGenius product

supports both wireless and wired tagging on your network. Wireless tagging can help you to divide

the permission for different group of users. Wireless Clients associated with SSID1‐4 will not have the

authority to manage the device when you enable the Profile Isolation except the Wireless VLAN ID is

the same as Management VLAN ID. Enable Profile Isolation will also restrict the communication

between wireless clients with different group of Wireless VLAN ID. Management VLAN (Wired) is

used to manage your device if the computer has authorized VLAN ID.

Following are VLAN configuration procedures:

Connect a PC to EnGenius product to LAN port with an IP address like 192.168.1.100 /

255.255.255.0 which is located within same subnet of EnGenius product LAN port IP address and

then open any popular WEB browser at http://192.168.1.1.

1. Enter admin for both default Username and Password or enter your own Username and Password.

Table of Contents