Headlamp High/Low-Beam Changer; Windshield Wipers - GMC C series 2002 Owner's Manual

Headlamp High/Low-Beam Changer

To change the headlamps from low to high beam or high
to low beam, pull the multifunction lever all the way
toward you, then release it.
2-38
When the high beams are
on, this light on the
instrument panel cluster will
also be on.

Windshield Wipers

The windshield wipers are controlled by turning the
band with the wiper symbol on it.
For a single wiping cycle, turn the band to MIST. Hold
it there until the wipers start, then let go. The wipers will
stop after one cycle. If you want more cycles, hold the
band on MIST longer.
For steady wiping at low speed, turn the band away
from you to the LO position. For fast wiping, turn the
band to HI. To stop the wipers, turn the band to the
off symbol.