Table of Contents
Advertisement
To set the call timer
You can time the duration of
each call.
During a call, press the Clock
button. The time of the
previous call will be displayed.
Press the Clock button again
to start the timer. You can stop
the time by pressing the Clock
button once more.
When you replace the handset
or press the Handsfree button
to end the call, the display shows
the final duration of the call for
a few seconds before returning
to the normal clock setting.
Using a headset
Converse headsets (RJ11 jack)
are available separately
from BT shops or by calling
0870 240 5522.
Plug the headset into the
socket marked HEADSET on
the underside of the base.
To make a call, press the
Headset button.
Dial the telephone number.
To end the call, press the
Headset button.
8
Converse 425 ~ 3rd Edition ~ 17th January '02 ~ 4118
Note
Secrecy
When on a call you can talk to someone
in the same room, without your caller
hearing.
To switch Secrecy on and off
During a call, press and release
the Secrecy button.
The red Secrecy light will
come on. Your caller cannot
hear you.
To resume your conversation,
press and release the Secrecy
button again. The Secrecy
light will go off.
Last number redial
Your Converse 425 stores the last
number called which enables quick and
easy redialling. A redial number can be
no longer than 32 digits.
To redial the last number called
Press the Handsfree button.
Press the Redial button.
The last number you called is
redialled.
Advertisement
Table of Contents
