BT Converse 425 ~ Issue 3 ~ 2nd Edition ~ 23rd July ’03 ~ 5528 At a glance Handset park When the phone is wall mounted you can hang the handset here if you need to leave the phone during a call.
In this guide At a glance Introduction Setting up Using the telephone Using BT Calling Features General information Wall-mounting Index In this user guide, we’ve included helpful tips and important notes. They are shown in boxes like this.
Screws, wall plugs and plinth for wall-mounting. 3 x AAA batteries Simply clean your Converse 425 with a damp (not wet) cloth, or an antistatic wipe. Never use household polish as this may damage the product. Never use a dry cloth as this may cause static shock.
Your Converse 425 can be wall-mounted. See ‘Wall-mounting’, on page 20. The display on your Converse 425 is powered by 3 x AAA alkaline batteries. Make sure the phone is not plugged into the phone socket. Open the battery compartment cover.
Page 7
TIME . Release the button. Display shows 00-00 . Enter the current time using the 24 hour clock, = 9.30am, = 3.30pm. Press the button. The time is set and displayed. Your Converse 425 is now ready for use.
Press the button. The displayed number is dialled in ‘handsfree’ mode. There are three ways to make a call on your Converse 425: by lifting the handset, using the or by using the button. Replace the handset. When the telephone rings, the...
Page 9
Your Converse 425 stores the last number called which enables quick and easy redialling. A redial number can be no longer than 32 digits. During a call, press and release button.
Page 10
This feature works in handset, handsfree and headset modes. If the number you call is engaged, you can set your Converse 425 to dial a number repeatedly, saving you from continually having to press the button. When you hear the engaged...
Page 11
There are 3 volume settings to choose from: HI, LOW or OFF. Use the ringer volume switch on the underside of your Converse 425 to set the volume you want: The call indicator light will flash regardless of the ringer setting chosen.
Page 12
Alternatively, turn the the digit you want is displayed then press the button. Repeat this step until the full telephone number is entered. Press and hold the button until the display shows ENTER NAME . Enter the letters you want using the keypad.
Page 13
Enter the new digit above the flashing cursor using the keypad or by turning the Press the button. When you have finished changing the number press and hold the the display shows the cursor flashing under the first letter of the name. Enter the new letter above the flashing cursor using the keypad or by turning the...
Page 14
Your Converse 425 provides all the basic calculator functions – addition, subtraction, multiplication, division and percentages as well as Memory Recall. +, --, X, /, =, %, AC, M-, M+ and MRC .
Page 15
If your Converse 425 is connected to a switchboard, you must first switch off the calculator before transferring a call. Your calculator provides a Memory Recall ( function. This enables you to put calculations in the memory while you make other...
Using BT Calling Features A switchboard can provide a similar range of functions to BT Calling Features. If your Converse 425 is connected to a switchboard, you can simply use it as a normal extension. Your Converse 425 gives you easy access to the following range of BT Calling Features.
Page 17
You can use your Converse 425 to request the network to divert incoming calls to another number. Press the lift the handset. Press the Turn the select 21 DIVERT ON . Press the button to dial the number. Enter the number to which you would like your calls diverted.
Page 18
You can turn your Converse 425 into a 24-hour alarm clock that rings you back at the exact time you specify. Press the lift the handset. Press the Turn the Navigator Wheel to select 55 REMINDER SET . Press the button to dial the number.
BT Converse 425 ~ Issue 3 ~ 2nd Edition ~ 23rd July ’03 ~ 5528 General information Guarantee Your Converse 425 is guaranteed for a period of 12 months from the date of purchase. Subject to the terms listed below the guarantee will provide for the repair of, or at BT’s or its agent’s discretion the...
BT Converse 425 ~ Issue 3 ~ 2nd Edition ~ 23rd July ’03 ~ 5528 Technical information How many telephones can you have? All items of telephone equipment have a Ringer Equivalence Number (REN), which is used to calculate the number of items which may be connected to any one telephone line.
Unclip the line plug from the telephone base. Unclip the stand from the base of the telephone and remove the stand. Reconnect the telephone line to the line socket on the base of the phone. Drill two holes in the wall 60mm vertically apart using an 8mm drill bit.
Need help?
Do you have a question about the CONVERSE 425 and is the answer not in the manual?
Questions and answers