Always assemble wall ducts with seals.
5.3 Exhaust pipe
5.3.1
Exhaust pipe
Use 2-layer stainless steel flexible exhaust pipe.
•
Keep the exhaust pipe as short as possible (maximum exhaust pipe length: see device-specific
installation instructions).
•
Route the exhaust pipe as straight as possible (permissible number of bends, smallest
permissible curve radius: see device-specific installation instructions).
•
No contact with temperature-sensitive objects such as electrical cables, water pipes, plastic
parts, sails or boat hull.
•
Minimum wall distance: ≥ 20 mm.
•
Minimum pipe diameters; see device-specific installation instructions.
5.3.2
Exhaust gas pipes in personnel accommodation
WARNING! Avoid installing the heater and exhaust pipes in personnel accommodation
if possible. (Danger of suffocation if routing is inappropriate)
•
If unavoidable: use rigid stainless steel pipes with a wall thickness ≥ 1mm.
•
Replace pipes with new ones after ≤ 10 years.
•
Make the joints especially precise and gas tight.
•
Use high temperature resistant sealing compound.
5.4 Exhaust pipe connections
•
When routing the exhaust pipes, pay attention: all connections must be sealed.
•
Use only Webasto
•
Permitted hose clamps for exhaust pipe mounting
10
Marine heating system Installation Instructions
®
approved hose connections. No hose clamps.
© Webasto Global Comfort Solutions
®