Ordering Information - Black Box 4-Port BNC Repeater Installation And User Manual

   
BLACK BOX 4-Port BNC Repeater Installation and User Guide
LED Indicators on Chassis
PWR - Power, Green LED, steady ON indicates there is AC power applied
to the unit.
JAM - Jam, Amber LED, illuminates when jam or jabber condition (illegal
packet size) is detected on any port; affected port is partitioned
temporarily until jabber stops.
ACT - Activity LED, flashes to indicate there is packet traffic in the unit.
LED Indicators per port
REC- Receive, Green LED, blinks to indicate network activity, data
being received from the port.
COL - Collision, Yellow LED, flashes when a collision is detected
on the port.
PAR - Partition, steady on indicates the port has been partitioned in order
to isolate it (and a fault connected to it) from the rest of the repeater
ports. The other ports should continue to function normally.
MAN PAR - Manual Partition, steady on indicates the port has been manually
partitioned using the adjacent pushbutton switch. This is typically
done as an aid to troubleshooting the BNC cable and connections
attached to the port.
Agency Approvals
UL Listed (UL 1950), cUL, CE, emissions meets FCC Part 15 Class A
115v 60 Hz Power Supply: UL Listed, CSA certified
230v 50 Hz Power Supply: UL Listed, CSA certified, GS approved
1.2

Ordering Information

4-Port BNC Repeater
LE8003A-R2 4-Port BNC Repeater, plus an AUI
connector for backbone connections,
compliant to Ethernet IEEE 802.3,
10BASE2, and 10BASE5 standards.
Auto-ranging internal power supply.
(Note: A "tee" connector is normally required for each BNC port)
2