Headlamp High/Low-Beam; Flash-To-Pass; Daytime Running; Lamps (Drl) - Cadillac 2011 Escalade Owner's Manual

6-6 Lighting
Headlamp
High/Low-Beam Changer
(Headlamp High/Low
Beam Changer): To change the
headlamps from low to high beam,
push the lever toward the instrument
panel. To return to low-beam
headlamps, pull the multifunction
lever toward you. Then release it.
When the high beams are on, this
indicator light on the instrument
panel cluster will also be on.

Flash-to-Pass

This feature lets you use the
high-beam headlamps to signal
a driver in front of you that you
want to pass. It works even if the
headlamps are in the automatic
position.
To use it, pull the turn signal lever
toward you, then release it.
If the headlamps are in the
automatic position or on low
beam, the high-beam headlamps
will turn on. They will stay on as
long as you hold the lever toward
you. The high-beam indicator on
the instrument panel cluster will
come on. Release the lever to
return to normal operation.
The low beam headlamps must be
on for the flash to pass feature
to work.
I n f o r ma t i o n P r o v i d e d b y :

Daytime Running

Lamps (DRL)

Daytime Running Lamps (DRL) can
make it easier for others to see the
front of your vehicle during the day.
Fully functional daytime running
lamps are required on all vehicles
first sold in Canada.
The DRL system comes on when
the following conditions are met:
The ignition is on.
The exterior lamps control is
in AUTO.
The transmission is not in Park.
The light sensor determines it is
daytime.