Cadillac 2011 Escalade Owner's Manual page 411

Hide thumbs Also See for 2011 Escalade:
Table of Contents

Advertisement

This certification mark indicates that
the oil has been approved to the
dexos specification.
This vehicle was filled at the factory
with dexos approved engine oil.
Notice: Use only engine oil
that is approved to the dexos
specification or an equivalent
engine oil of the appropriate
viscosity grade. Engine oils
approved to the dexos
specification will show the
dexos symbol on the container.
Failure to use the recommended
engine oil or equivalent can
result in engine damage not
covered by the vehicle warranty.
If you are unsure whether the
oil is approved to the dexos
specification, ask your service
provider.
Use of Substitute Engine Oils if
dexos is unavailable: In the event
that dexos approved engine oil is
not available at an oil change or
for maintaining proper oil level,
you may use substitute engine oil
displaying the API Starburst symbol
and of SAE 5W-30 viscosity grade.
Use of oils that do not meet the
dexos specification, however, may
result in reduced performance under
certain circumstances.
Viscosity Grade
SAE 5W-30 is the best viscosity
grade for the vehicle. Do not
use other viscosity oils such as
SAE 10W 30, 10W 40, or 20W-50.
I n f o r ma t i o n P r o v i d e d b y :
Vehicle Care
Cold Temperature Operation:
In an area of extreme cold,
where the temperature falls
below 29°C ( 20°F), an
SAE 0W-30 oil should be used.
10-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

2011 escalade esv

Table of Contents