Cadillac 2011 Escalade Owner's Manual page 312

7-110 Infotainment System
Voice Pass-Thru
Voice pass thru allows access to the
voice recognition commands on the
cell phone. See your cell phone
manufacturer's user guide to see if
the cell phone supports this feature.
To access contacts stored in the cell
phone:
g
1. Press and hold for
two seconds.
2. Say Bluetooth. The system
responds Bluetooth ready,
followed by a tone.
3. Say Voice. The system
responds OK, accessing
<phone name>.
The cell phone's normal prompt
messages will go through their cycle
according to the phone's operating
instructions.
Dual Tone Multi-Frequency
(DTMF) Tones
The Bluetooth system can send
numbers and the numbers stored as
name tags during a call. You can
use this feature when calling a
menu driven phone system.
Account numbers can also be
stored for use.
Sending a Number or Name Tag
During a Call
g
1. Press . The system
responds Ready, followed by
a tone.
2. Say Dial.
3. Say the number or name tag
to send.
I n f o r ma t i o n P r o v i d e d b y :
Clearing the System
Unless information is deleted out of
the in vehicle Bluetooth system, it
will be retained indefinitely. This
includes all saved name tags in the
phone book and phone pairing
information. For information on how
to delete this information, see the
previous section Deleting a Paired
Phone and the previous sections
on deleting name tags.
Other Information
®
The Bluetooth word mark and
logos are owned by the Bluetooth
SIG, Inc. and any use of such marks
by General Motors is under license.
Other trademarks and trade names
are those of their respective owners.
®