Cadillac 2011 Escalade Owner's Manual page 243

Battery Replacement
To change the remote control
batteries:
1. Slide the rear cover back on the
remote control.
2. Replace the two batteries in the
compartment. Make sure they
are installed correctly using the
diagram on the inside of the
remote control.
3. Replace the battery cover.
If the remote control is to be stored
for a long period of time, remove the
batteries and keep them in a cool,
dry place.
Tips and Troubleshooting Chart
Problem
There is no power.
The picture does not fill the
screen. There are black borders
on the top and bottom or on
both sides, or the picture looks
stretched out.
In auxiliary mode, the picture
moves or scrolls.
The remote control does
not work.
I n f o r ma t i o n P r o v i d e d b y :
Infotainment System
Recommended Action
The ignition might not be turned to
ON/RUN or ACC/ACCESSORY.
Check the display mode settings in the
setup menu by pressing the display
menu button on the remote control.
Check the auxiliary input connections at
both devices.
Check to make sure there is no
obstruction between the remote
control and the transmitter window.
Check the batteries to make sure
they are not dead or installed
incorrectly.
7-41