Table of Contents
Advertisement
AID:
connecting ID of STA；
Signal：AP detected RSSI of STA；
Assoc
Time：time online of STA；
Tx/Rx
Packets：send-receive packets between AP and STA. Tx means sending packets from AP to STA, Rx
means receiving packets from STA to AP；
Tx/Rx Bytes:
send-receive bytes between AP and STA. Tx means sending bytes from AP to STA, Rx means
receiving bytes from STA to AP；
Tx/Rx Rate:
rate using by send-receive packets between AP and STA. Tx means senidng rate from AP to
STA, Rx means receving rate from STA to AP, in fact it is sending rate of STA.
3.1.7
AP Stats List
When CPE works as Station Mode, AP Status List shows info of CPE connecting AP, as Figure 3-7
SSID:
SSID name of AP that CPE is connecting；
BSSID:
BSSID address of AP that CPE is connecting；
Mode：Radio work mode of AP that CPE is connecting；
Channel:
working channel of AP that CPE is connecting；
Signal:
CPE detected AP RSSI；
Assoc
Time：duration online after CPE is connecting AP；
Tx/Rx
Packets：send-receive packets between CPE and AP. Tx means sending packets from CPE to AP, Rx
means receiving packets from AP to CPE；
Tx/Rx Bytes:
send-receive bytes between CPE and AP. Tx means sending bytes from CPE to AP, Rx means
receiving bytes from AP to CPE ；
Tx/Rx Rate:
rate using by send-receive packets between CPE and AP. Tx means senidng rate from CPE to
AP, Rx means receving rate from AP to CPE, in fact it is sending rate of AP.
5G CPE User Manual
Figure 3-7
Page 9 , Total 25
Advertisement
Table of Contents
