Configuration Preparation; Installation Device; Network Settings - Cablematic WIS-Q5300 User Manual

1. Application
Thank you for your purchase
nfigure WIS-Q5300.

2. Configuration Preparation

2.1 Installation Device

 Press the clip of 5G CPE，pull out the cover，stick one end of cable into ETH port; Slide the cover
until the clip locked.
 Stick the other end of cable into POE port of power adapter.
 Take another cable, stick one end of cable into LAN port of adapter, the other end into computer port.
 Power adapter is plugged into outlet to ensure power open.

2.2 Network Settings

 Set PC and set IP address as 192.168.1.x（x is 1-254 except 2，to make sure no conflict with other IP of
network.）
 Run Web browser, input http://192.168.1.2（default IP address）and enter。
 Figure 2，Default username：admin，Password：admin（You can change this password after entering
the system），and then click Login to the system.
5G CPE User Manual
WIS-Q5300 5G CPE Wireless AP。This handbook is to help you know and co
Figure 1
Page 2 , Total 25