Table of Contents
Advertisement
Network Role
1.
Network Mode :
used for setting current network mode.
2. WAN Network Settings
WAN IP Address:
WAN IP adsress obtaining way, separately static set, DHCP access and PPPoE negoiation.
Because static set and DHCP access are the same with setting of Bridge Mode, there is directly introduction
PPPoE；
used for setting PPPoE connection username ；
Username:
Password:
used for setting PPPoE connection password；
Service Name:
used for setting PPPoE connection service name；
Fallback IP:
used for setting fallback IP address after PPPoE negoiation failed；
Fallback Netmask:
used for setting fallback netmask of IP address after PPPoE negoiation failed
5G CPE User Manual
Figure 3-18
Page 18 , Total 25
；
Advertisement
Table of Contents
