Table of Contents
Advertisement
Network Mode:
used for setting current network mode.
2. Management Network Settings
Bridge IP Address:
Bridge IP address obtaining way, separately static set and DHCP access；
IP Address:
used for setting static IP address；
Netmask:
used for setting netmask of static IP address；
Gateway IP:
used for setting static gateway address；
Primary DNS IP:
used for setting static main DNS address；
Secondary DNS IP:
MTU:
used for setting MTU, the default is 1500 bytes.
LAN Network Settings
3.
used for "enable" or "to enable" DHCP Server function, the default is "to enable"state；
DHCP Server:
Range Start:
used for setting range start IP address of DHCP Server address pool；
Range End:
used for setting range end IP address of DHCP Server address pool；
Netmask:
used for setting netmask of DHCP Server address field；
Lease Time:
used for setting lease time DHCP Server assigned address；
used for "enable" or "to enable" DNS proxy function.
DNS Proxy:
3.4.2
WISP Mode
Setting of WISP Mode is shown as Figure 3-18.
5G CPE User Manual
used for setting static backup DNS address:
Page 17 , Total 25
Advertisement
Table of Contents
