Table of Contents
Advertisement
Security：used for setting security type, the default is None.；
If choosing WEP security type，as shown Figure 3-13.
Authentication
Type：used for setting authentication method, the default is open；
WEP Key
Length：used for setting WEP key length, the default is 64 bit；
Key
Type：used for setting key type , the default is ASCII type；
WEP
Key：used for entering WEP key；
Key
Index：used for choosing key index, the default is 1.
If choosing WPA/WPA2 security type, as shown Figure 3-14.
WPA
Authentication：used for setting WPA/WPA2 authentication method, current only supporting PSK .
WPA Preshard
Key：used for setting PSK key of WPA/WPA2, supporting ASCII and Hex.
3.3.2
Station/Station WDS Mode
When CPE is set as Station/Station WDS Mode, Wireless Page is shown as Figure 3-15.
5G CPE User Manual
Figure 3-13
Figure 3-14
Page 14 , Total 25
Advertisement
Table of Contents
