Table of Contents
Advertisement
MTU/MRU:
used for setting MTU and MRU PPPoE negoiation；
used for setting MPPE Agreement when"enable" or "to enable" PPPoE negoiation is using
Encryption:
（Microsoft Point-to-Point Encryption Agreement） ；
NAT：used for setting NAT service of "enable" or "to enable"CPE；
NAT
Protocol：For some NAT service of special agreement, it needs to enable alone, CPE supporting NAT
service of SIP、RSTP、FTP and PPTP.
LAN Network Settings
3.
IP address:
used for setting IP address of management devices；
Netmask:
used for setting netmask of IP address；
used for "enable" or "to enable" DHCP Server function, the default is "to enable"state；
DHCP Server:
Range Start:
used for setting range start IP address of DHCP Server address pool；
Range End:
used for setting range end IP address of DHCP Server address pool；
Netmask：used for setting netmask of DHCP Server address field；
Lease Time:
used for setting lease time DHCP Server assigned address；
used for "enable" or "to enable" DNS proxy function.
DNS Proxy:
3.5 SERVICES Page
Services Page is used for setting safe access, access management and so on, as Figure 3-19.
5G CPE User Manual
Page 19 , Total 25
Advertisement
Table of Contents
