Figure 17 The Control Center Main Menu; Changing System Settings - Ioline Supernova I/S Series User Manual

24 Ioline SmarTrac User Guide
Figure 17. The Control Center Main Menu.

Changing System Settings

You can adjust many settings with the Control Center to fit your needs:
 Put the signcutter in START mode (Green light mode)
before changing system settings. To do so, press the
START / STOP key and make sure the Green light is on
before changing any settings.
 The Screen Menu displays most commonly adjusted param-
eters. The Menu Bar contains utilities and less commonly
adjusted signcutter settings.
 Your selected changes take effect only after you press one of
the Send Settings buttons.