Before Starting Installation; Installation Procedure; Eliminating Static Electricity During Installation - Pioneer SGY-PM910H Installation Manual

Before Starting Installation

EN
Installing, pairing, and calibrating the product requires specialized techniques and tools. Ask the shop where you
bought the product to install, pair, and calibrate it.

Installation Procedure

The product is installed in the order shown here.
1. Checking operation of the sensors (page 7)
2. Installing the magnet rings (page 9)
3. Calibrating the magnets and fixing them in place (page 15)

Eliminating Static Electricity during Installation

Before starting the installation, touch a large metal object (such as a door knob or metal table) to discharge any static electric
charge in your body.
Eliminate static electric charge occasionally while installing the product.
6