Initial Settings; Auto Set Up - JVC HR-S6960E Instructions Manual

INITIAL SETTINGS

Auto Set Up

Auto Channel Set/Auto Clock Set/
Auto Guide Program Number Set
After the button on the recorder or remote control is
1
pressed for the first time to power on the recorder, by simply
selecting your country*, the Auto Set Up function sets the
tuner channels, clock** and Guide Program numbers
automatically.
* If you live in Belgium (BELGIUM) or Switzerland (SUISSE), you also
need to select your language.
** If you live in Hungary (MAGYARORSZÁG), Czech Republic (CESKÁ
REPUBLIKA), Poland (POLSKA) or other countries in Eastern Europe
(OTHER EASTERN EUROPE), set the clock manually.
Before starting, make sure of the following:
The TV aerial cable should be connected to the recorder.
The recorder's mains power cord should be connected to a
mains outlet.
The TV should be set to its AV mode (with AV connection
pg. 10) or UHF channel 36 (with RF connection
pg. 10).
ATTENTION
While performing Auto Set Up for the first time,
do NOT disconnect the recorder from the power supply (AC)
do NOT press any button unless instructed
ensure that Auto Set Up is not interrupted while the operation
is still in progress
A
Turn on the recorder.
Press on the recorder or remote control. The Country
1
Set display appears on the TV screen.
NOTE:
If you have connected your TV to
the recorder with RF connection
and the on-screen display
appearing on UHF channel 36
looks distorted, perform "Video
Channel Set" on page 60.
B
Select your country.
Press to move the
rt
highlight bar (pointer) to your
country's name.
(Example) DEUTSCHLAND is
selected.
NOTES:
If you have selected BELGIUM or SUISSE, go to step 3.
If you have selected MAGYARORSZÁG, CESKÁ REPUBLIKA,
POLSKA or OTHER EASTERN EUROPE, press OK. The Clock
Set screen appears. Set the clock manually (
go to step 4.
If you have selected any other country name, go to step 4.
11
EN
pg. 58), then