Express Timer Programming - JVC HR-S6960E Instructions Manual

Express Timer
Programming
Before performing Express Timer Programming:
Make sure that the recorder's built-in clock is set properly.
Insert a cassette with the safety tab in place. The recorder
will come on automatically.
Turn on the TV and select the video channel (or AV mode).
If you do not know the S
HOW
you wish to record, use the following procedure to set your
recorder to timer-record the programme.
Example: To timer-record the programme from 21:00 to
22:00 on 25th December, on channel 1.
A
Access the S
HOW
Press PROG.
B
Access the Programme screen.
Press START+/–. (If you're
just starting out, "P1"
appears.)
The front display panel looks like this:
C
Enter the programme start time.
Press START+/– to enter the
time you want recording to
start.
Press and hold START+/– to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
The front display panel looks like this:
D
Enter the programme stop time.
Press STOP+/– to enter the time you want recording to
stop.
Press and hold STOP+/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
E
Enter the programme date.
Press DATE+/–.
The current date appears on the TV screen. The date you enter
appears in its place.
EN
V number for the programme
IEW
V screen.
IEW
29