JVC HR-S6960E Instructions Manual page 32

32
EN
Check, cancel and change programmes
A
Disengage the timer mode.
Press (TIMER), then press
#
B
Access the Programme Check screen/display.
Press .
"
C
Access the Programme screen/display.
Press again to check
"
more information. Each time
you press , the next
"
programme's information
appears.
The front display panel shows the programme number. Pressing
OK changes the display to the programme start time, the stop
time, the date, the tape speed then the channel position.
.
1
TIMER RECORDING (cont.)
To cancel or change a programme...
D
Cancel or change a programme.
Press to cancel a programme. To change programme
&
settings, press the appropriate button: START+/–,
STOP+/–, DATE+/–, PR+/–, VPS/PDC (number key "7"),
DAILY (number key "8"), WEEKLY (number key "9") and/
or SP/LP/EP ( ).
p
You can change "TV PROG" to "SAT" for the channel position
by pressing the number key "0".
If you do not want to edit the programme title, skip steps 5 and
6.
E
Access the Title Edit screen.
Press the number key "1".
The Title Edit screen appears.
You can access the title edit
screen only when "PROG.
NAVIGATION" is set to "ON".
( pg. 48)
F
Enter the programme title.
Press the number keys and
to enter characters, then
press OK. For details, refer to
"Entering Character" on
page 38.
G
Return to the normal screen/display.
Press as many times as necessary. If there are still
"
some programmes remaining, go on to step 8.
H
Return to the timer mode.
Press (TIMER).
#
NOTE:
You can also check the programmes on the front display panel
even if the recorder's power is off (unless the recorder is in the
Power Save mode pg. 50) or the recorder is in the Timer
mode; however, it is not possible to cancel or change the
programmes.
e