JVC HR-S6960E Instructions Manual page 44

44
EN
Perfect Connections
This is an example of recommended connection if your
TV has two 21-pin AV input (SCART) connectors.
Connect the decoder to the satellite receiver's connector
if you have a decoder, AV1 (L-1) IN/OUT connector to
TV's connector, and AV2 (L-2) IN/DECODER connector
to the satellite receiver's connector. Then connect the
satellite receiver and TV.
Satellite receiver
Decoder
Back of recorder
Mains outlet
Outdoor unit
Aerial
Satellite cable
SYSTEM CONNECTIONS (cont.)
NOTES:
Set "L-2 SELECT" to "A/V" (
You can use Automatic Satellite Programme Recording
function ( pg. 34) with this connection.
To record a programme via the satellite receiver, select L-2
mode by pressing AUX (number key "0") and/or PR so that
"L-2" appears on the front display panel.
To receive a scrambled broadcast, descramble the signal with
the decoder connected to the satellite receiver.
For details, refer to the instruction manual of the satellite
receiver and decoder.
21-pin SCART
connector
TV aerial cable
ANT. IN
RF OUT
pg. 42).
Aerial
connector
Back of TV