Mbm-Gem-003I Gigabit Ethernet Module Led Descriptions; Table A-2. Mbm-Gem-003I Gigabit Ethernet Switch Led Indicators - Supermicro MicroBlade MBM-GEM-001 User Manual

MicroBlade Network Modules User's Manual
A-2 MBM-GEM-003i Gigabit Ethernet Module LED
Descriptions
MBM-GEM-003i Gigabit Ethernet module LEDs are described below in

Table A-2. MBM-GEM-003i Gigabit Ethernet Switch LED Indicators

LED
Module Initiation OK
LED
Module Fault LED
(Red)
Link/Activity Ethernet
Port Status LED
Speed Ethernet Port
Status LED
State Description
The MBM-GEM-003i GbE switch module is operational and
Steady On has passed the POST (Power-On Self-Test) with no critical
faults.
When lit, this LED indicates that the GEM-001 GbE switch
module has either failed the POST or has detected an
Steady On
operational fault within the module. When this LED is lit, the
fault LED on the blade enclosure will also turn on.
Solid Green This indicates that the link is established, no activity
This indicates that data is being transmitted (Tx) or received
Blinking Green
(Rx)
Off This indicates that no link is established
Amber Connection speed of the port is 1 Gb/sec
Green Connection speed of the port is 100 Mb/sec
Off Connection speed of the port is 10 Mb/sec
A-2
Table A-1.