This chapter covers the Ethernet switch modules available for your MicroBlade
enclosure. The Ethernet switch modules can only be installed in the upper and lower left
and right module bays.
4-1
MBM-GEM-001 Gigabit Ethernet Switch Module
The MBM-GEM-001 Gigabit Ethernet switch module is a layer 2 Ethernet switch. It
includes eight 10-Gb/s uplink (SFP+) ports and fifty-six 1/2.5-Gb/s downlink ports for the
MicroBlade's LAN interfaces. The Gigabit Ethernet switch module has two internal
Ethernet paths to the CMM(s). The switch is used to provide a connection between the
Ethernet controller integrated on the mainboard and an external Ethernet device. This is
a hot-pluggable module. See
Figure 4-1. MBM-GEM-001 Gigabit Ethernet Switch Module
4
1
Table 4-1. MBM-GEM-001 Gigabit Ethernet Switch Module Interface
Item
Description
1
RS232 (COM) Serial Port
2
SFP+ Ethernet Ports
3
LEDs
4
Module Release Handle
Chapter 4
Ethernet Modules
Figure
4-1,
2
Table 4-1
and
Table 4-2
3
4-1
for switch details.