User Config; User Time Lock; User Name Text; Deleting User Codes - Texecom Premier 888 User Manual

Premier 888 & 8168 User Manual

User Config.

This menu will only be displayed if a Custom User type is
selected AND 'User Menu' (User Option: 9) is enabled (see
page 32 for details).
This option defines which User menu options the selected
User can access when they enter their code.
The following options are available:
1 - Change Code
Yes: The selected user can change their own User code.
No: The selected user cannot change their own User code.
If the User code needs to be changed, another user,
with access to 'Setup Users' will have to do it.
2 - Chime Zones
Yes: The selected user can access the 'Edit Chime Zones'
option, allowing them to select which zones chime
when activated (see page 23 for details).
No: The selected user cannot access the 'Edit Chime
Zones' option.
3 - Change Timer
Yes: The selected user can access the 'Change Timer'
option, allowing them to override the Control Timers
if required (see page 27 for details).
No: The selected user cannot access the 'Control Timer'
option.
4 - System Tests
Yes: The selected user can access the 'System Tests'
option, allowing them to walk test zones, activate the
external sounder etc. (see page 24 for details).
No: The selected user cannot access the 'System Tests'
option.
5 - Setup Users
Yes: The selected user can access the 'Setup Users'
option, allowing them to alter existing users or assign
new users (see page 30 for details). However, users
cannot assign User types to the system that have a
higher access level than themselves. Also, if a user
assigns a Custom User type, functions that are not
available to them cannot be assigned to the Custom
user.
No: The selected user cannot access the 'Setup Users'
option.
6 - Eng. Access
Yes: The selected user can access the 'Enable Engineer'
option, allowing them to authorise Engineer access
or Remote UDL access to the system (see page 26
for details).
No: The selected user cannot access the 'Enable
Engineer' option.
7 - Add Eng. Code (Engineers only)
Yes: The selected user can assign new Engineers to the
system.
No: The selected user cannot assign new Engineers to the
system.
8 - NVM Locking (Engineers only)
Yes: The selected user can alter the 'NVM Locked' option
in 'System Options'.
No: The selected user cannot alter the 'NVM Locked'
option in 'System Options'.
INS177

User Time Lock

This option allows the selected user to be denied access
to the system at different times of the day and days of the
week. When a Control Timer is assigned to a user, the
User code will not allow access to any functions during the
timer 'On' period.

User Name Text

Each user can be assigned up to 16 characters of name
text. This can be beneficial when reading the log, as
identification of people is made easier.
Text is programmed in a similar way to mobile phones.
Select characters by pressing the corresponding key the
appropriate number of times (to select a character on the
)
same key, press the key to move the cursor along).

Deleting User Codes

If a User code needs to be deleted from the system, this
must be done, by a user that has access to the 'Setup
Users' menu (see page 30 for details).
➤ To delete User codes proceed as follows:
Ensure that Setup Users is selected, the display should
look like this:
!"#$"%#&'()#)"
A.)%N#G-.+-/
# # # #
Press , the display should look like this:
A.)%N#G-.+-#
I().+#G-.+#HH
Select a user from 1 to 49 (Premier 888) or 1 to 99
.. ..
.. ..
(Premier 8168) then press
should look like this:
I().+#G-.+#B"<.X
#####HHHHHH
( (
( (
Press , the display will look something like this:
!"#$"%#&'()#)"
!ITIMI#G-.+#3:
!
Where '15' is the selected User number.
# # # #
Press to confirm deletion of the selected User code.
/ /
/ /
Press to exit from Setup Users
The User Menu
# #
# #
, the display
33