Connecting External Devices; Installation Procedure - IBM IntelliStation M Pro User Manual

Note: Because of the placement of the adapter support brackets, you might find it
Note: If you removed the support bracket, reinstall it before you replace the cover.
Do the following to replace the computer cover:
1. Clear any cables that might impede the replacement of the cover.
2. Install the side cover by placing it into position on the computer. Be certain the
3. If you have not done so already, make sure that the two front stabilizing feet
4. Reconnect the external cables and power cords to the computer; then connect
5. Turn on the attached devices; then turn on the computer.

Connecting external devices

You can attach several external devices to your computer.

Installation procedure

To attach an external device:
1. Be sure your computer and all attached devices are turned off.
2. Read "Installing adapters-before you begin" on page 29 and the documentation
44
IntelliStation M Pro: User Guide
easier to lay the computer on it side with the cover lock facing you.
See "Removing the support bracket" on page 31 for details.
notches on the underside of the cover match up to the holes along the sides of
the computer. Press down on the cover release latch button as you close the
cover release latch to lock the cover.
are rotated outward so that they properly support the computer. Rotate each
individual foot outward 90 degrees.
the power cords to electrical outlets.
that comes with your options.