Timer Recording; Show View ™ Timer Programming; Express Timer Programming - JVC HR-V610E Instructions Manual

Timer Recording

Up to 8 timer recording programmes can be made.
Before starting:
Set the clock properly. (
Set "COLOUR SYSTEM" to the appropriate mode. (
Load a cassette with the record safety tab intact.
NOTES:
PDC recording is not possible in Central and Eastern Europe.
If all the 8 programmes have already been set, "PROGRAM
FULL" appears on the screen.
If the clock is not set, "CLOCK MUST BE SET" appears on the
screen.
After timer recording is completed, the recorder turns off
automatically.
If the tape reaches its end during timer recordings, the recording
stops and "#", " " and " $" on the display panel blink. Press
# to disengage timer, then press 0 on the recorder to eject
the cassette or press 1 then press 3 to rewind the tape.
You can programme the timer recording while a regular
recording is in progress; the menu screens will not be recorded.
1
START
4
VPS/PDC
7
0000
™
S V Timer Programming
HOW IEW
The S V numbers are the numbers next to the programme
HOW IEW
in most TV listing.
A
Press PROG to access the Timer Programming Set screen.
B
Press RT to place the pointer next to
"S V ", then press OK or
HOW IEW
S V NO. screen appears.
HOW IEW
C
Press the appropriate number keys to
input the S V number, then press
HOW IEW
OK. The S V program screen
HOW IEW
appears.
If the number you entered is invalid,
"ERROR" appears on the screen. Press &
and input a valid S V
HOW
13)
2 3
STOP DATE
5 6
DAILY WEEKLY
8 9
AUX
0
AUDIO TV/ VCR
PR
OK
PR
REC
. The
number.
IEW
Make sure the channel position number you wish to record is
displayed; if "TV PROG" displays "– –", set the channel position
number correctly. Press PR
number on which your recorder receives the station. Then press
OK.
To set the channel position number for
the satellite broadcast station, press
12)
the number key "0" to change "TV
PROG" to "SAT". Press PR
input the channel position number on
which your satellite receiver receives
that station. Then press OK.
To set the tape speed, press p(SP/
LP).
To set the VPS/PDC mode, press VPS/PDC (number key "7").
To change the stop time, press STOP
and/or "5").
To timer-record daily (Monday–Friday) or weekly serials, press
DAILY (number key "8") or WEEKLY (number key "9"). Pressing
the button again makes the "DAILY" or "WEEKLY" display
disappear.
To change the channel position number, press PR
D
Press OK or PROG.
If "PROGRAM OVERLAPPED" appears, see "Program overlap
warning display" (
E
Press #. The recorder turns off automatically and "#" is
displayed on the display panel.
To timer-record a satellite broadcast using the S
A Perform "Satellite Receiver Control Set" (
B Perform steps 1 1 1 1 – 5 5 5 5 . In step 3 3 3 3 , you cannot set "VPS/PDC" to
"ON".
C Leave the satellite receiver's power on.

Express Timer Programming

A
Press PROG to access the Timer Programming Set screen.
B
Press RT to place the pointer (highlighted bar) next to
"EXPRESS PROGRAMMING", then press OK or
program screen appears.
C
Press START
and/or "4"), STOP
and/or "5"), DATE
and/or "6") or PR
the start time, stop time, date or channel.
Press and hold START
/ to increase the time in 30-minute
intervals.
To set the tape speed, press p(SP/LP).
To set the VPS/PDC mode, press VPS/PDC (number key "7").
To timer-record daily (Monday–Friday) or weekly serials, press
DAILY (number key "8") or WEEKLY (number key "9"). Pressing
the button again makes the "DAILY" or "WEEKLY" display
disappear.
D
Press OK or PROG.
If "PROGRAM OVERLAPPED" appears, see "Program overlap
warning display" (
E
Press #. The recorder turns off automatically and "#" is
displayed on the display panel.
To timer-record a satellite broadcast using Express Timer
Programming:
A Perform "Satellite Receiver Control Set" (
B Perform steps 1 1 1 1 – 5 5 5 5 . In step 3 3 3 3 , press the number key "0" to
change "TV PROG" to "SAT". Then press PR
channel position for the satellite broadcast. You cannot set "VPS/
PDC" to "ON".
C Leave the satellite receiver's power on.
— 9 —
/ to input the channel position
/ to
/
10).
/ (number keys "1"
/ (number keys "2"
/ (number keys "3"
/ repeatedly to enter
/ or STOP
10).
(number keys "2"
/ .
V system:
HOW IEW
5).
. The
5).
/ to enter the