JVC HR-V610E Instructions Manual page 14

Major Countries/Areas
Austria, Denmark, Finland, Holland, Italy,
Norway, Spain, Switzerland, Sweden,
Germany, Egypt, Western Europe
China, Mongolia, Rumania, Bulgaria, Czech
Rep., Slovakia, Hungary, Poland, Russia,
Central or Eastern Europe
E
Store new channel
Press OK.
Repeat steps 2 2 2 2 – 5 5 5 5 as necessary.
F
Return to normal screen
Press MENU.
Deleting a channel
A
Access Confirmation screen
Perform step 1 1 1 1 of "Manual Channel Set" (
B
Select position
Press RT to until the channel you want to delete
begins blinking.
C
Delete channel
Press &. The channel directly beneath the cancelled one moves
up one line.
Repeat steps 2 2 2 2 – 3 3 3 3 as necessary.
D
Return to normal screen
Press MENU.
Changing station channel positions
A
Access Confirmation screen
Perform step 1 1 1 1 of "Manual Channel Set" (
B
Select position
Press RT until the station you want to move begins
blinking, then press OK. The channel number (CH) and the station
name (ID) begin blinking.
C
Select new position
Press RT to move the station to the new position,
then press OK.
Example: If you moved the station in position 4 to position 2, the
stations originally in positions 2 and 3 each move down one
space.
Repeat steps 2 2 2 2 – 3 3 3 3 as necessary.
D
Return to normal screen
Press MENU.
When receiving a scrambled broadcast
TV System
NOTE:
When you select a country in Central or Eastern Europe for
B/G
country setting, you cannot use decoder with this recorder.
A
D/K
Set "L-2 SELECT" to "DECODER". (
B
Perform step 1 1 1 1 of "Manual Channel Set" (
C
Press RT
scrambled programmes, then press OK twice.
D
Press
pressing RT. Then press OK.
E
13).
Press MENU.
Changing station name
A
Perform step 1 1 1 1 of "Manual Channel Set" (
B
Press RT
then press OK twice. The Manual Channel Set screen appears.
C
If the station name is registered in your recorder,
Press
until the desired station name appears, then press OK.
Repeat steps 2 2 2 2 – 3 3 3 3 as necessary.
13).
Otherwise,
Press
blinking. Press RT to cycle through the characters, then press
4). After entering all characters, press OK.
D
Press MENU.
Fine-tuning channels
A
Perform step 1 1 1 1 of "Manual Channel Set" (
B
Press RT
blinking, then press OK twice. The Manual Channel Set screen
appears.
C
Press
picture is its clearest. Then press OK.
D
Press MENU.
— 14 —
Select decoder mode
Access Confirmation screen
Select position
to select the channel broadcasting
Change decoder setting
until "OFF" begins blinking, and set it to "ON" by
Repeat steps 3 3 3 3 – 4 4 4 4 as necessary.
Return to normal screen
Access Confirmation screen
Select position
until the desired channel begins blinking,
Select station name
until the station name (ID) begins blinking. Press RT
until the first letter of the station name (ID) begins
. Enter the remaining characters the same way (maximum of
The characters available for the station name (ID) are A-Z, 0-9, –,
*, +, _ (space).
If you make a mistake, press
begins blinking. Then enter the correct character by pressing
RT.
Return to normal screen
Access Confirmation screen
Select position
until the channel you want to tune begins
Perform tuning
until "+/–" begins blinking, then press RT until the
Repeat steps 2 2 2 2 – 3 3 3 3 as necessary.
Return to normal screen
12)
13).
13).
until the incorrect character
13).